These photographs were taken at a large shared block of flats in the seaside town of Eastbourne. Recently a decision was made to replace the carpet in the entrance hallway and they discovered a lovely but damaged Victorian tiled floor underneath. A decision was made to restore the floor back to its former glory and we were asked to do the work.
Cleaning Victorian Tiles
The carpet had been stuck down with gaffer tape which is fortunate as sometimes a gripper rod is used with nails piercing the grout. To deep clean the heavy build-up of dirt from the tiles and remove the tape adhesive I applied a dilution of Tile Doctor Remove and Go combined 50/50 with Pro-Clean and left it to soak into the floor allowing it time to break down the glue. Over the course of the next two days the solution was scrubbed into the tiles, rinsed and then the soiled solution extracted and then re-applying until I was satisfied the floor was clean. It was a residential property and I couldn’t have anyone walking through the floor as I worked so I directed them up the fire exit. The kids really enjoyed the detour.
Sealing Victorian Tiles
Following 48hrs drying time I returned on what must have been the warmest day of the year to seal the floor with a shiny and hard wearing Tile Doctor sealer called Pro-Seal. Victorian tiles are quite porous so eight coats were required in the end.