As you can see from the photographs below the ceramic tiles and grout in this Shower Cubicle in East Sussex were in need of a deep clean. Ceramic tiles are very easy to clean however the grout was very discoloured and so we decided to apply a grout colourant.
Cleaning Shower Tile and Grout
To clean up the ceramic tiles and grout we sprayed on Tile Doctor Oxy-Pro which is a specialist Shower Tile and Grout Cleaner, the spray allows the cleaning agent to mix with air making it lighter and easier to stick to vertical surfaces. This is important as you need to let the cleaning agent dwell on the surface of the tile and grout for a few minutes before scrubbing it by hand with a stiff brush and then washing it off with clean water.
The cleaning process managed to clean up the tiles and did make a difference on the grout but there was quite a few stains left on the grout so we proceeded with grout colouring starting with the application of the Pre-Treater which prepares the grout ensuring a good bond with the grout colouring product.
Once the Pre-Treater had dried I started the application of the white grout colourant which you work into the grout using a toothbrush, for best results you need to work it forwards and backwards to achieve an even coat. I used two coats of grout colourant in the end to ensure shadowing from some of the darker stains were not visible.
These grout colouring products are self sealing so after 24 hours it is fully cured and protected. Last step was to strip out the old silicone at the bottom of the shower, this had gone a bit mouldy and once mould gets a hold on silicone it’s impossible to get rid off, we replaced the sealant with a fresh White Mapeisil waterproof silicone.
The renovation was now complete, tiles cleaned, grout restored and sealant replaced; naturally the customer was very pleased with the results as the shower looked like new again.
Shower Cubicle Restored in East Sussex