Photographs below of a job we did restoring the shine on a Limestone tiled floor at a house in the town of Hastings which is down on the south coast of England and well known as the location for that famous battle in 1066. The homeowner wanted an easy to maintain low sheen Limestone floor; we advised that Limestone is a soft sedimentary Stone and is not usually classed as a low maintenance surface however with the right treatment and equipment they should be able to maintain it which is a bit like buying a carpet without having a vacuum to keep it clean.
Cleaning and Polishing Limestone Tiles
To get the Limestone Tiled floor back to its original condition we used a set of diamond encrusted 17” Burnishing Pads fitted to a heavy rotary buffing machine. It’s important to give the floor a clean first to ensure there’s no dirt that could get picked up by the machine and cause deep scratches on the surface. You start off with the coarse red pad together with a little water which can remove sealers and then move onto the White pad which grinds off ingrained dirt again used with a little water. Next step is the Yellow Polishing pad which smooth’s the surface prior to the final Green pad which gives that high shine finish.
Sealing Limestone Tiles
The floor was washed down to remove any particles left over from the polishing and left to dry before we set about sealing using two coats of Tile Doctor Colour Grow. Colour Grow is recommended for a number of stone surfaces and does well to lift the natural colours in the stone as well as providing on-going surface protection.