Deep Cleaning a Textured Limestone Kitchen floor in Horsham

This property near the town of Horsham was a converted from a pig barn many years ago and had a lovely textured Limestone tiled floor installed on the ground floor kitchen and dinning room. The Limestone tile and adjacent grout were now looking rather grubby and we were asked if we would give them a deep clean and re-seal.

Deep Cleaning Textured Limestone Tiles

Once I’d helped the customer move the furniture I set about soaking the tiles in a strong dilution of Tile Doctor Pro-Clean applied with a deck brush and then left to dwell for around five minutes. Leaving the product to dwell on the tiles gives it time to break down and soften up and old sealer left of the tile making it easier to remove. To get the Pro-Clean worked into the tile and grout I used a rotary buffing machine fitted with a black scrubbing pad and ran a stiff brush along the grout lines. The result was immediate, especially the grout. I then rinsed the floor with warm water and extracted the now soiled cleaning solution with a wet vacuum.

After this I inspected the floor and re-treated any areas which need further attention using the same process giving the floor a good rinse with clean water at the end and using the wet vacuum to remove as much water as possible before leaving the floor to dry off.

Sealing Textured Limestone Tiles

I returned two days later to give the tiles plenty of time to allow the moisture to evaporate; it’s important that the tiles are bone dry before sealing or you will get unexpected results. All was well so I sealed the floor with two coats of Tile Doctor Colour Grow which soaks into the pores of the stone protecting it from within and enhancing the natural colours within the stone at the same time.

While I was waiting for the sealer to dry between coats I gave her front step a good scrubbing with some left over cleaning product.

Restoration of a Textured Limestone in Horsham